How To Stop Toilet Flapper From Closing Too Quickly?

The toilet flapper system works with simple principle. That’s using floats and gaskets to fill the water when it’s filling and discharging when it’s necessary. But if you do not know it will be difficult to imagine fixing the toilet when it comes to discharge problems.

Although the mechanism is simple but it works very well and needs very high accuracy. Just a little bit of damage to the gasket or hollowed-out plume could lead to water leakage.


The toilet flapper

Operating mechanism and how to repair toilet bowl valve when you have some troubles.

The supplied water system can be divided into three parts: lock valve, overflow tube and float.

Valve lock: A type of piston such as a bicycle pump, it is fitted with rubber seal to seal the supplied water hole when it filled full. Moving up to open the water and moving down to lock the water. The entire upper surface is compressed by the float.

Overflow tube: This is a section that allows water to enter with a drainage hole. Helps the float to catch the body with a hinge-type handle that can be moved up and down. A new type of float will be the rails for the buoy up and down.

The float: Including round float or flip boat to float on the water, and the float from the pontoon to the overflow tube. Pressing the valve to close when the ball floats high enough.

1. Flapper and inlet valve does not discharge water

This is a phenomenon when we pull the lever but not see the water in the toilet drain through the drain hole to provide water for the toilet. When this happens, you need to check the connection between the drain valve and the lever. It is possible that the leash may have been cut off or too long, and the cord may have slipped off. Lever, which makes the valve not pull up as soon as we pull the lever.

To overcome this phenomenon, you just need to reconnect the thread between the drain valve and the lever or short cut according to the manufacturer's rate as well as re-attach the hook; the toilet drain valve will work normal again.


The flapper does water go through down

You shake the trip lever outside to the bottom. The force is transmitted through the long rod and the connecting rod. Pull up the flapper valve to open the drainage hole under the toilet seat.

Due to the hemispherical structure, the water is in the tank. The flapper valve as well as a float does not close when the water has run out. Once the water has drained out, the cap will return to the sealing position of the drainage hole so that the water will not escape when it enters.

If excess water flows through excess, water drainage on the discharge body to get out of the water tank.

2. Replacing the damaged flapper valve:

Bringing damaged flapper valves to specialized stores and buying new ones of the same type, size and shape. You can also buy a standard exhaust valve, which can fit most toilet types. If you want to install the new exhaust valve, you should place it in place and insert it into the hinge on the spillway.

Opening the water and trying to see if the system is working properly, if the water is not flowing anymore, you are successful on how to stop toilet flapper from closing too quickly.

Read more: